Easy Peanut Brittle Recipe (2024)

Published on | Updated on by Melissa

This post may contain affiliate links meaning if you buy from them, I will make a few pennies, at no cost to you. See disclosurehere.

This easy peanut brittle recipe is golden, buttery, and perfect as a treat or to package up for holiday gifts. This homemade candy is salty and sweet and only has six ingredients!

Easy Peanut Brittle Recipe (1)

How to make Peanut Brittle

Homemade candy is a favorite during the holiday season – hard candy, crockpot peanut clusters, peanut butter fudge, and this old fashioned peanut brittle recipe.

I loved Planters Peanut Bars when I was little but I don’t think they make them anymore. This peanut brittle is similar and so easy to make yourself!

You do need to use a candy thermometer but don’t let that intimidate you. You’ll be fine as long as you don’t get distracted (speaking from experience).

Easy Peanut Brittle Recipe (2)

Why you’ll love this Easy Homemade Peanut Brittle

Easy Recipe – Candy making doesn’t have to be intimidating, this one is a breeze! Even if this is your first time making candy, you’ll be fine.

Simple Ingredients – You only need a handful of ingredients, six to be exact, that you likely already have on hand.

Family Favorite – This candy recipe is great any time of year but makes a great holiday gift if you bag it up into treat bags to pass out.

Equipment you’ll need

  • Baking Sheet – Use a lipped baking sheet to keep the peanut brittle on the pan.
  • Candy Thermometer – Nothing fancy, you just need a basic one, but it is helpful to have a clip to hook to the pot.
  • Silicone Spatulas – I use these for everything in the kitchen.

Ingredients

Below is a list of the ingredients you’ll need to gather to make this recipe.Scroll all the way down for the full recipe card.

  • SUGAR – Granulated white sugar.
  • CORN SYRUP – Use light corn syrup. I use Karo syrup.
  • WATER
  • BUTTER – Unsalted butter, cubed.
  • BAKING SODA – The baking soda creates a chemical reaction causing little air bubbles to form. The candy becomes porous and brittle, making it easy to break into pieces.
  • PEANUTS – I like to use roasted peanuts for flavor but raw spanish peanuts were traditionally used.
Easy Peanut Brittle Recipe (3)

How to make peanut brittle

This brittle candy is so easy to make, but it does require you to watch the temperature so don’t get distracted!

  1. STEP ONE: Grab a large cookie sheet with sides (like a jelly roll pan) and cover it with foil. Spray with nonstick cooking spray and set aside.
  2. STEP TWO: Stir together the sugar, corn syrup, and water in a medium saucepan. Bring the mixture to a boil and continue to boil until the temperature reaches 340 degrees F. It should be golden brown after about 15 minutes.
  3. STEP THREE: Remove the pan from the heat and add butter and baking soda. It will bubble up (that’s the chemical reaction) so work quickly stirring with a silicone spatula until smooth.
  4. STEP FOUR: Pour in the peanuts and stir to evenly distribute. Quickly pour the peanut brittle mixture onto the lined baking pan and spread it evenly into a thin layer.
  5. STEP FIVE: Let the candy harden, at room temperature (about 30 minutes), and then break into pieces and store in an airtight container.
Easy Peanut Brittle Recipe (4)

Which types of nuts should I use?

Peanuts are the classic choice to use in nut brittle. Roasted peanuts have great flavor. Raw Spanish peanuts were traditionally used but either work. You could also use almonds, cashews, macadamia nuts, pecans…just about any will work.

What does baking soda do to peanut brittle?

Baking soda might seem like an odd addition to the peanut brittle and not everyone adds it, but baking soda creates a chemical reaction that creates little air bubbles. It is added once the sugar mixture has cooked down and becomes acidic. The candy becomes porous and brittle, making it easy to break into smaller pieces.

Easy Peanut Brittle Recipe (6)

Why is my peanut brittle chewy?

There is where the candy thermometer becomes important. The biggest reason your peanut brittle is chewy and sticky is because you didn’t cook it long enough. It’s not something you can guess at, you need it to reach the hard crack stage. that means the strands of sugar break easily and feel dry, as opposed to sticky.

If you take it off the heat too soon, it doesn’t set up and makes a sticky mess, but let it cook too long and it becomes scorched and bitter.

Another possible cause might be humidity in the air.You should store finished peanut brittle in an airtight container so humidity doesn’t get to it.

Easy Peanut Brittle Recipe (7)

How long is it good for?

When stored in an airtight container, at room temperature, peanut brittle will keep for 6-8 weeks. Do not put it in the fridge as it as the moisture will cause the brittle to soften.

Itcan also be frozen and stored up to 3 months.

Need more homemade candy recipes? Try these:

Christmas Oreo Bon Bons
Grinch Christmas Cream Cheese MintsCrockpot Salted Caramel Fudge
Peanut Butter Balls
Crockpot Cinnamon Sugar Candied Almonds
Christmas “Crack”
Candied Pecans
Crockpot Candy

Click here to view my entire collection of candy recipes.

Easy Peanut Brittle Recipe (8)

Connect with Persnickety Plates!

Follow along on my social media so you never miss a post!

I made a fun group on Facebook for sharing recipes, asking questions, and talking about food. I’d love to have you! Request to join HERE.

Also, sign up to receive an email in your inbox for each new recipe:

FREE EMAIL SUBSCRIPTION & EBOOK

Easy Peanut Brittle Recipe (9)

Easy Peanut Brittle Recipe

Melissa Williams | Persnickety Plates

This easy peanut brittle recipe is golden, buttery, and perfect as a treat or to package up for holiday gifts. This homemade candy is salty and sweet and only has six ingredients!

4.77 from 17 votes

Print Recipe Pin Recipe Rate Recipe Save

Prep Time 5 minutes mins

Cook Time 20 minutes mins

Harden Time 30 minutes mins

Total Time 55 minutes mins

Course Dessert, Snack

Cuisine American

Servings 10 servings

Calories 390 kcal

Ingredients

  • 2 cups granulated sugar
  • ½ cup light corn syrup
  • ½ cup water
  • 6 Tablespoons unsalted butter cubed
  • ½ teaspoon baking soda
  • 1 ½ cups roasted peanuts

Instructions

  • Line a lipped baking sheet with foil and spray with non-stick spray. Set aside.

  • To a medium saucepan, add the sugar, corn syrup, and water. Add in the candy thermometer to the pan making sure it touches the mixture but not the bottom of the pan. Bring the mixture to a boil over medium heat and then continue to boil until the mixture is golden brown and reaches 340 degrees. This should take about 15 minutes.

  • Remove the pan from the heat and quickly stir in the butter and baking soda until smooth. Then stir in the peanuts until evenly distributed.

  • Pour the mixture onto the prepared baking sheet and spread evenly with a silicone spoon, working quickly, as it will start to set.

  • Let harden at room temperature, about 30 minutes, and then break up into pieces.

Notes

Use a candy thermometer to make sure your sugar mixture reaches 340 degrees. Hook the thermometer to the side of the pan so it touches the mixture but not the bottom of the pan.

Store in an airtight container.

Nutrition

Serving: 1gCalories: 390kcalCarbohydrates: 57gProtein: 6gFat: 18gSaturated Fat: 6gCholesterol: 18mgSodium: 170mgPotassium: 170mgFiber: 2gSugar: 53gVitamin A: 210IUCalcium: 26mgIron: 1mg

Nutritional information is an estimate and provided to you as a courtesy. You should calculate the nutritional information with the actual ingredients used in your recipe using your preferred nutrition calculator.

Tried this recipe? Tag me!Mention @melissa_pplates or tag #persnicketyplates!

Sharing of this recipe is both encouraged and appreciated. Copying/pasting and/or screenshots of full recipes to any social media is strictly prohibited. Content and photographs are copyright protected.

Originally published December 13, 2020.

This recipe first appeared on Yellow Bliss Road.

Easy Peanut Brittle Recipe (2024)

FAQs

Why didn't my homemade peanut brittle get hard? ›

The main reason why peanut brittle doesn't get hard and have the crunch we expect is because the sugar was not cooked long enough. The sugar needs to be cooked to what is called the hard crack stage, 300ºF.

Why put baking soda in peanut brittle? ›

Baking soda is also very important at this stage since it reacts to the heat, creating carbon dioxide that aerates the caramel, enabling it to snap when someone bites into it rather than requiring them to gnaw at it until it breaks or pulls apart.

Why didn't my peanut brittle turn brown? ›

It reached the correct temperature but didn't cook long enough to undergo sufficient Maillard reactions and develop the characteristic brown color and rich, roasted flavor. Next time, cook at a lower temperature. Also, make sure to add your peanuts once the syrup reaches the soft ball stage (239°F).

How do you keep peanut brittle crispy? ›

The candy will attract moisture from the air, making it unpleasantly sticky instead of shatteringly crisp. Once it's completely cool, transfer it to an airtight container.

What makes brittle hard? ›

What Makes it Brittle? The sugar will be cooked to 300ºF (149ºC)—hard crack stage; which when set up would be hard like a lollipop. But peanut brittle is delicate and you can easily bite into it—how? The secret is in the baking soda.

What makes peanut brittle too hard? ›

Why is it too hard? Using baking soda usually prevents peanut brittle from being too, well, brittle. However, if you cook the candy past the set temperature or overwork the candy once you spread it out onto the cookie sheet, that can cause it to become very hard and difficult to bite through.

Why is my peanut brittle hard but sticky? ›

What's important to know is that the corn syrup controls the grain of the brittle so adding too little and you have a grainy textured brittle, while adding too much will result in a stringy and sticky brittle.

Why did my peanut brittle turn white? ›

Peanut brittle turning white, often referred to as "sugaring," is typically the result of crystallization of the sugar in the candy. This crystallization can make the brittle appear white or cloudy rather than having a clear, glass-like consistency.

Can you overcook peanut brittle? ›

If you overcook the brittle, it could be bitter or burnt. If you undercook it, the brittle won't properly set and the end result will be sticky. A thermometer is an accessible and inexpensive way to monitor temperature and ensure properly cooked brittle. Make sure your baking soda is fresh and active.

Why is my brittle bitter? ›

Alternatively, cooking brittle at too high of a temperature can lead to a scorched or bitter flavor. Butter your table top before pouring the batch to prevent it from sticking to the table.

Does weather affect making peanut brittle? ›

I've learned that brittle is better when made on a cool, dry day. When I've made the candy on a warmer, humid day, it tends to be a stickier brittle. This is because the brittle takes longer to cool, and it reaches a point where it is no longer evaporating moisture into the air.

Can peanut brittle spoil? ›

Unopened store-bought peanut brittle, when stored in a cool and dry place, can easily last 6-9 months past the 'best by' date printed on the packet. Once opened, you should aim to eat it within 1-2 months to enjoy it at its best quality, but it may still be safe for consumption after this time.

Should homemade peanut brittle be refrigerated? ›

To store: Once it's completely cooled, store peanut brittle in an airtight container at room temperature. Do not refrigerate as the moisture from the fridge will cause the brittle to soften. Store for 6-8 weeks. To Freeze: Peanut brittle can be frozen and stored up to 3 months.

Can you make peanut brittle when it rains? ›

If the weather conditions are less than ideal, you can still make a great candy recipe with a few tweaks. Because excessive softness in candy results from high relative humidity, cook hard candies, such as nut brittle, to 2 degrees higher than the temperature your recipe calls for.

Why are my peanuts not getting soft? ›

Dried peanuts will require a longer soaking time before cooking, so leave them to soak for at least 8 hours or overnight. Soaking the peanuts ensures that they will soften more easily when they are cooked, giving them their delicious texture.

Why did my peanut butter fudge not get hard? ›

If you didn't reach the correct temperature during the cooking process, it might not set properly. Use a candy thermometer to ensure that you reach the recommended temperature. Overcooking or Undercooking:Solution: Cooking the fudge for too long or too short a time can affect its texture.

Why is my peanut butter fudge not hard? ›

The amount of time you cook fudge directly affects its firmness. Too little time and the water won't evaporate, causing the fudge to be soft. Conversely, cook it too long and fudge won't contain enough water, making it hard with a dry, crumbly texture.

Top Articles
Latest Posts
Article information

Author: Tish Haag

Last Updated:

Views: 6715

Rating: 4.7 / 5 (47 voted)

Reviews: 86% of readers found this page helpful

Author information

Name: Tish Haag

Birthday: 1999-11-18

Address: 30256 Tara Expressway, Kutchburgh, VT 92892-0078

Phone: +4215847628708

Job: Internal Consulting Engineer

Hobby: Roller skating, Roller skating, Kayaking, Flying, Graffiti, Ghost hunting, scrapbook

Introduction: My name is Tish Haag, I am a excited, delightful, curious, beautiful, agreeable, enchanting, fancy person who loves writing and wants to share my knowledge and understanding with you.