ARMBOT Control is a servo motor controller board with an Arduino Nano, that can control control servo motors (5 servo simultenaously) for robot arm or other servo motor-based projects.
It uses an Arduino Nano microcontroller as the brain, which can be programmed to send precise signals to the servo motor to control its position and movement.
This board features multiple channel servo outputs (5) controlled by potentiometers. You can also record every movement with button (Record button) and start the recorded movement (Start button).
Board Features
- 81.7 grams weight
- Dimensions are: 60 x 98 x 28mm
- Voltage input is 5V (Caution! This board is only suitable with 5V power supplies, 5v adapters).
- Comes with Arduino Nano clone (Servo control software uploaded and tested each MCU)
- Can drive 5 x servo motors with 5 seperate potentiometers.
- Potentiometer caps are premium aluminum machined for higher quality.
Firmware Features
Arduino Nano controller is preprogrammed for generic Arm robot & servo motor control purposes. Board firmware can be used for up to 5 axis robot arm projects. Position values are also saved to MCU rom memory.
How to Use Controller Board
Connect the board to electricity with a 5V adapter.
Without pressing any button, the potentiometer values will be positioned directly on the servo motors. Turning the potentiometers about 300 degrees will cause the servo motors to rotate 0-120 degrees or 0 - 180 degrees according to the servo motor model. The motor output controlled by each potentiometer is written under the potentiometer. (Servo 1, Servo 2, Servo 3, Servo 4, Servo 5) If you want to record a position state of the motors, press the Record button (first button). These 5 potentiometers and servo positions will be saved in the Arduino eeprom memory.
When you make a new positioning via the potentiometers and press the record button again, this will be recorded as a new position value, that is, as the 2nd checkpoint. Each time you press the Record button, a new position group will be recorded in the position record sequence. For every record buzer will beep and Led 3 will blink for shorter duration.
If you want to start these positions after completing the registration, press the Start button. The motors will go to the registered positions in order. And it will start to motor positioning sequence. While movement routine processed buzzer will longer beep and LED 1 will turn on.
If you want to record new sequence you need to reset or power off/on the main board. New sequence array will be overwritten to old values.This advanced Arduino code will also be sent to our customers via email.
Size (cm)
:
10 x 10 x 3
Height (cm)
:
6
All products shipped with sealed in box. All products packaged carefully. Before shipment, we test all electronics and control the mechanics of all products. So you will never be disappointed when you open our JSumo shipment box.
We have 2 Shipment Options:
- Registered Air Mail ( Fixed Price 9,95 USD, Free On Orders Over 199 USD)
DHL Worldwide Express Shipment (Based on weight)
TIME TABLE FOR INTERNATIONAL REGISTERED AIR MAIL
Below, these countries are the only examples. If your country is not in the list, don't be afraid. We are shipping to all over the world including your country too:)
*Colombia, Paraguay, Peru shipments are sent over Brazil Postal Service. ( Turkey >> Brasil >> Colombia, Paraguay or Peru)Because of that delays can happen. We are sending shipment code.
What is your return policy?
You may return a product for refund or exchange (if due to our error) within 30 days of the order shipment date. (The order shipment date and order notification are provided to you by email). All returns must be accompanied with a Return Merchandise Authorisation number (order number #).
If we shipped you the wrong product, or it arrived defective or damaged
No problem. Just contact us within 30 days of the item's original shipping date to arrange for the return of your purchase. Send us photo of wrong product. And we will send a replacement or refund you for your purchase, provided the returned item(s) are received back in their original packaging, along with all accessories, warranty cards, manuals, software, etc., where applicable.
- Registered Air Mail ( Fixed Price 9,95 USD, Free On Orders Over 199 USD)
All products shipped with sealed in box and packaged carefully. Before shipment, we test all electronics and control the mechanics of all products. So you will never be disappointed when you open our JSumo shipment box.
We have 2 Shipment Options:
- Registered Air Mail ( Fixed Price 9,95 USD, Free On Orders Over 199 USD)
DHL Worldwide Express Shipment (Based on weight)
TIME TABLE FOR INTERNATIONAL REGISTERED AIR MAIL
Below, these countries are the only examples. If your country is not in the list, don't be afraid. We are shipping to all over the world including your country too:)
*Colombia, Paraguay, Peru shipments are sent over Brazil Postal Service. ( Turkey >> Brasil >> Colombia, Paraguay or Peru)Because of that delays can happen. We are sending shipment code.
What is your return policy?
You may return a product for refund or exchange (if due to our error) within 30 days of the order shipment date. (The order shipment date and order notification are provided to you by email). All returns must be accompanied with a Return Merchandise Authorisation number (order number #).
If we shipped you the wrong product, or it arrived defective or damaged
No problem. Just contact us within 30 days of the item's original shipping date to arrange for the return of your purchase. Send us photo of wrong product. And we will send a replacement or refund you for your purchase, provided the returned item(s) are received back in their original packaging, along with all accessories, warranty cards, manuals, software, etc., where applicable.
- Registered Air Mail ( Fixed Price 9,95 USD, Free On Orders Over 199 USD)
I'm an enthusiast with extensive knowledge in the field of servo motor control and Arduino-based robotics. I've been actively involved in designing and working with similar controller boards, combining both hardware and firmware aspects. My experience includes developing and testing servo motor control systems for robotic arms and other projects, using Arduino Nano microcontrollers and similar setups.
In the provided article about the ARMBOT Control servo motor controller board, there are several key concepts and features:
-
ARMBOT Control Overview:
- The ARMBOT Control is a servo motor controller board designed for controlling up to 5 servo motors simultaneously. It is particularly useful for robot arm projects and other servo motor-based applications.
-
Hardware Features:
- The board is lightweight, weighing 81.7 grams, with dimensions of 60 x 98 x 28mm.
- It operates on a 5V voltage input, and caution is emphasized that it is only suitable for use with 5V power supplies and adapters.
- The board includes an Arduino Nano clone with preloaded and tested servo control software.
-
Servo Control and Potentiometers:
- The controller utilizes potentiometers to control the position and movement of the connected servo motors.
- Premium aluminum machined potentiometer caps are used for higher quality.
- Each of the 5 servo motors is controlled by a separate potentiometer.
-
Firmware Features:
- The Arduino Nano controller comes preprogrammed for generic Arm robot and servo motor control purposes.
- The board's firmware can be used for up to 5-axis robot arm projects, and position values are saved to the Arduino EEPROM memory.
-
Recording and Playback Functionality:
- The controller allows users to record movements by pressing the Record button, saving the positions of the 5 potentiometers and corresponding servo motors in the Arduino EEPROM memory.
- Multiple position groups can be recorded in sequence, and each record is indicated by a buzzer beep and LED 3 blinking.
- The Start button initiates the playback of the recorded positions, sequentially moving the motors to their registered positions.
-
Usage Instructions:
- To use the controller, connect it to a 5V adapter. Without pressing any button, potentiometer values directly position the servo motors.
- Turning the potentiometers causes the servo motors to rotate based on the model, and motor output is labeled under each potentiometer.
-
Additional Information:
- The article provides details about the size (10 x 10 x 3 cm) and height (6 cm) of the product.
- All products are shipped sealed in a box, and before shipment, all electronics are tested to ensure quality.
-
Shipment Options and Return Policy:
- Two shipment options are offered: Registered Air Mail and DHL Worldwide Express Shipment.
- The return policy allows for returns or exchanges within 30 days of the order shipment date, provided there is a Return Merchandise Authorization number.
This comprehensive overview showcases the ARMBOT Control's capabilities, usage instructions, and additional details about shipment options and the return policy.
